Roof Scupper

Stop seeking.You have found!
FD03 Scupper Roof Drain Detail
File Format: PDF/Adobe Acrobat - View as HTMLYour browser may not have a PDF reader available. Google recommends visiting our text version of this document.FD03 Scupper Roof Drain Detail. Notes. 1. This detail shall be installed only where the deck is Scupper opening through roof edge shall be 2’ or less.
www.fieldscorp.com/commercial/
Architecture Design Handbook: Architectural Details: Gutters and
The minimum recommended weight for the con-struction of scuppers is 16 oz. copper. Scuppers are fabricated with flanges on the roof side which extend 4".
www.copper.org/applications/architecture/
Roof Drains, Deck Drains, Re-roof Drains, Balcony Drains, Scuppers
Roof Drains of All Types, Re-roof Drains, Deck Drains, Parking Garage Drains, Overflow Drains, Scuppers and Replacement Parts.
www.bestmaterials.com/drains.aspx
Jail September 10 02
Williams stated the opening in the roof scupper on the precast panel was two inches low, so that puts the scupper at the same elevation as the roof drain.
www.co.chippewa.wi.us/meetings/
Adapter only
Roof Drains and Scuppers for new construction .Parapet/Scupper Drains Installation Instructions. CAD Page. All information is subject to change without.
www.portalsplus.com/drains_673xx.htm
Roof Scupper Drain – Eave boxes-Scupper Leader Heads, Downspout
Scuppers are tubes used to carry water from a roof through a wall and then down through the side of a building. Sometimes they are used as an overflow.
www.bbsheetmetal.com/downspout-scuppers/index.html
ICC Bulletin Board: Roof scuppers and overflow drains.
1106.5 Parapet wall scupper location. Parapet wall roof drainage scupper and overflow scupper location shall comply with the requirements of the.
www.iccsafe.org/cgi-bin/ultimatebb.
Plumbing Roof Drainage Design - Information for Architects
There are two methods of meeting this requirement, Providing the proper number of scuppers through the parapet or Providing an additional system of roof.
www.repwars.com/PSP/roofdrai.html
Johns Manville Single Ply EPDM Roofing Details
EM-6T, JM Metal Membrane Flashing Tie-In To Existing Built-Up Roof - Tape, PDF · DWG · DXF. EM-7 (1), Overflow Scupper Flashing, PDF · DWG · DXF.
www.jm.com/roofing_systems/cad_details/610.htm
B.2 Scupper Through Roof Edge
B.2 Scupper Through Roof Edge. Return to Flashing Specification and Details.
www.koppers.com/roofing/roofdetailsb2.htm